RAD 4월 12일에 포스트됨 공유하기 4월 12일에 포스트됨 원문제목: RAD Studio 11.3 Alexandria Patch 1 Available 원문: https://blogs.embarcadero.com/rad-studio-11-3-alexandria-patch-1-available/ 작성자: Marco Cantu (2023.4) Today Embarcadero released a patch for RAD Studio, Delphi, and C++Builder 11.3 Alexandria. This patch addresses several issues in RAD Studio 11.3, including a content type parsing issue with REST requests and skipping some database events, some errors in the IDE and debugger, and some missing files for the new TBiometricAuth component. Installing this patch is recommended for all RAD Studio 11.3 customers. 오늘 엠바카데로가 RAD스튜디오, 델파이, C++빌더 11.3 알렉산드리아의 패치를 출시했다. 이번 패치는 REST 요청의 콘텐츠 유형 파싱 문제, 일부 데이터베이스 이벤트 스킵, IDE 및 디버거 오류, 새 TBiometricAuth 컴포넌트 일부 누락 파일 등 11.3의 여러 문제를 해결했다. 이번 패치는 RAD스튜디오 11.3 고객이라면, 모두 설치할 것을 권장한다. GetIt-based installation steps for this deferred package are very similar to what already described in the blog post https://blogs.embarcadero.com/rad-studio-11-alexandria-patch-1-available/. Notice that you also have the ability to “dismiss” a patch and not be reminded about it in the Welcome Page any more, even without installing it. Notice also that if you install the patch via GetIt the IDE About Box will indicate the patch has been installed. 이번 패키지의 겟잇 기반 설치 단계는 https://devgear.co.kr/archives/5320 에 안내되어 있는 것과 거의 동일하다. 패치를 설치하지 않더라도 웰컴 페이지(Welcome Page)에서 이에 대한 알림이 울리지 않도록 "무시(dismiss)" 할 수 있는 기능도 제공된다. 겟잇으로 패치를 설치하면 IDE About Box에 설치되었음이 표시된다. In this case you download the patch ZIP file from the my.embarcadero.com portal (where it will be available shortly), you’ll have to install it manually, following similar steps of the automated install. You need to manually close the RAD Studio IDE before you install the patch (you’ll see an error if the IDE is running) and follow the steps in the readme. my.embarcadero.com 포털에서 패치 ZIP 파일을 다운로드 받아 설치하는 경우 (곧 제공 예정), 자동 설치할 때와 유사한 순서로 수동 설치해야 한다. 패치 설치 전 RD스튜디오 IDE를 수동으로 종료하고 (IDE가 실행중인 경우, 오류가 발생할 수 있음), readme에 안내된 단계에 따라 설치를 진행해야 한다. Additionally, we have already released an update to the local help files on the docs site, see links below in the readme, and we’ll make the same update available in GetIt shortly. 또한 docs 사이트에 있는 로컬 도움말 파일 업데이트도 이미 완료되었으며, 아래와 같이 readme에 있는 링크를 참고하면 된다. 겟잇(GetIt)에서도 동일한 업데이트를 곧 제공할 예정이다 (2023.4.12 기준). 목차 RAD스튜디오 11.3 패치 #1 Readme 겟잇(GetIt)으로 설치하기 수동 다운로드 및 설치 언인스톨 절차 로컬 도움말 파일 업데이트 이번 패치로 해소된 퀄리티 포털 이슈 RAD스튜디오 11.3 패치 #1 Readme This patch addresses several issues in RAD Studio 11.3, including a content type parsing issue with REST requests and skipping some database events, some errors in the IDE and debugger, and some missing files for the new TBiometricAuth component. Installing this patch is recommended for all RAD Studio 11.3 customers. This patch is about 325MB to download. 이번 패치는 REST 요청의 콘텐츠 유형 파싱 문제, 일부 데이터베이스 이벤트 스킵, IDE 및 디버거 오류, 새 TBiometricAuth 컴포넌트 일부 누락 파일 등 11.3의 여러 문제를 해결했다. 이번 패치는 RAD스튜디오 11.3 고객이라면, 모두 설치할 것을 권장한다. 다운로드 크기는 325MB 정도이다. 겟잇(GetIt)으로 설치하기 If you download the patch via GetIt, it is installed automatically, creating a backup of the files replaced. However, because PAServer is installed on remote computers, you need to manually reinstall PAServer on the target platforms you are working with, following the steps at: https://docwiki.embarcadero.com/RADStudio/en/Installing_the_Platform_Assistant_on_Windows 겟잇으로 패치 파일을 다운로드 하는 경우, 파일 백업을 만들면서 자동 설치된다. 그러나 PAServer가 원격 컴퓨터에 설치되므로, 작업을 진행하는 대상 플랫폼에 PAServer를 직접 수동으로 재설치해야 한다. 다음 링크를 통해 절차를 확인할 수 있다: https://docwiki.embarcadero.com/RADStudio/en/Installing_the_Platform_Assistant_on_Windows 수동 다운로드 및 설치 This patch is also available in the download portal at my.embarcadero.com. In this case, after downloading and expanding the ZIP file, you should run the patch.R113.patch1_install.bat file or manually expand the R113.patch1.zip into the respective subfolders of the RAD Studio installation folder. You also need to update PAServer on target platforms as discussed above. 이번 패치는 my.embarcadero.com 다운로드 포털에서도 받아서 사용할 수 있다. 우선 ZIP 파일을 다운로드하고 압축 해제를 한 뒤에 patch.R113.patch1_install.bat 파일을 실행하거나, RAD스튜디오 설치 폴더에 있는 하위 폴더에서 있는 R113.patch1.zip을 직접 해제하면 된다. 위에서 언급한 것과 같이 대상 플랫폼에서 PAServer를 업데이트하면 된다. 언인스톨 절차 If you installed the patch via GetIt: Open the Catalog Repository installation folder and move to the patch folder Run the patch.R113.patch1_uninstall.bat file Only *after* you have cleared the patch, uninstall the package from GetIt 겟잇(GetIt)으로 패치를 설치한 경우: Catalog Repository 설치 폴더를 열어 패치 폴더로 이동한다. patch.R113.patch1_uninstall.bat 파일을 실행한다. 패치를 "삭제한 후", 겟잇에서 패키지를 제거한다. If you installed the patch manually: Open the folder you expanded the patch ZIP file into Run the patch.R113.patch1_uninstall.bat file Delete the folder and patch ZIP file 패치를 수동 설치한 경우: 압축 해제한 패치 ZIP 파일을 연다. 그 안에 있는 patch.R113.patch1_uninstall.bat 파일을 실행한다. 폴더와 패치 ZIP 파일을 삭제한다. 로컬 도움말 파일 업데이트 Separately, we are making available an update of the 11.3 local help files in GetIt and at https://docs.embarcadero.com/products/rad_studio/ (see the ZIP files for Offline CHM Help and Offline Libraries CHM Help) 이와는 별개로 11.3 로컬 도움말 파일 업데이트를 겟잇과 https://docs.embarcadero.com/products/rad_studio/ 에서 제공한다 (Offline CHM Help 및 Offline Libraries CHM Help ZIP 파일 참조) 이번 패치로 해소된 퀄리티 포털 이슈 RSP-41180 RESTResponse 컴포넌트의 컨텐츠 반환 이슈 RSP-41178 Embarcadero Formulardesigner/VCL 이슈 RSP-41170 프로젝트를 열 때 IDE AV 이슈 RSP-40997 iOS 시뮬레이터 ARM64용 TBiometricAuth 중 누락된 파일 이슈 RSP-40802 DBGrid가 가득차 있는 경우 이벤트 OnValidate가 실패하는 이슈 RSP-40757 비어있는 REST 응답 이슈 RSP-40726 OData APIs에 대해 Delphi REST API / TRESTRequest가 응답하지 않는 이슈 RSP-40601 “LSP-Verhalten” 옵션 설정 오류 RSP-40549 RESTRequest가 여러 부분의 ContentType을 허용해야 하는 이슈 The patch also addresses the following internally found issues and internal support tickets: 내부적으로 확인한 이슈 해소 항목: The Win64 LLDB debugger now does not show *simple* datatypes in the mouse hints when hovering on variables Win64 LLDB 디버거가 변수에 마우스 커서를 올렸을 때 마우스 힌트에 *간단한* 데이터타입을 표시해주지 않음 TRESTClient does not recognise response as JSON when Content-Type is application/vnd.retailer.v8+json TRESTClient가 Content-Type이 application/vnd.retailer.v8+json인 경우, 응답을 JSON으로 인식하지 못함 AV when trying Generate SQL in a FireDAC Update SQL Editor FireDAC Update SQL Editor에서 SQL 생성을 시도할 때 AV가 발생함 C++ debugger doesn’t evaluate Button->Text properly on iOS platform C++ 디버거가 iOS 플랫폼에서 Button->Text를 올바르게 유효성을 체크하지 않음 IDE slow when debugging on Android 32-bit and 64-bit 안드로이드 32-bit 및 64-bit에서 디버깅 시 IDE가 느려 인용하기 이 댓글 링크 다른 사이트에 공유하기 더 많은 공유 선택 사항
Recommended Posts
이 토의에 참여하세요
지금 바로 의견을 남길 수 있습니다. 그리고 나서 가입해도 됩니다. 이미 회원이라면, 지금 로그인하고 본인 계정으로 의견을 남기세요.